MA lighting dot2 User Manual page 571

dot2 User Manual - Commands
Version 1.5 – 2018-11-29
English
b) Press Update Preset 1 Please
Preset 1 is updated with the values in the programmer.
After an update, the fixtures sheet view displays the name of the preset.
To see the values stored in the preset, tap and hold the preset tile.
Example 4
Let´s assume, you will update cue 2 on executor 2 with the values in the programmer.
There are three ways to do this:
a) Press Update 2
b) Press Update 2
c) Press Update 2
If cue 2 on executor 2 is your current active cue, press
Cue 2 of executor 2 is updated with the values in the programmer.
Related Links
Edit Command
Update Key
What is a Programmer?
Presets Pools View
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
.
(=Cue 2) Exec 2 Please
(=Cue 2) and press executor button 2
(=Cue 2) and tap at executor 2 in the
.
.
executor bar window.
Update and the executor button 2 .
571 of 614