MA lighting dot2 User Manual page 563

dot2 User Manual - Commands
Version 1.5 – 2018-11-29
English
Figure 1: Selected fixtures
Press Thru (=Fixture Thru)
All fixtures in the show are selected.
Example 2
Let´s assume you will select fixture 5 thru 10.
Press Fixture 5 Thru 1 0 Please
The fixtures from 5 thru 10 are selected.
Example 3
Let´s assume you will delete cue 3 and all following cues from the main executor.
Press Delete Cue 3 Thru Please
Cue 3 and all following cues are deleted from the main executor.
Example 4
Let´s assume you will delete cue 3 and all following executors from executor button 1.
Important:
After you pressed
Continue the command with the cue number and the executor number / press an executor button. The
cue will be deleted on the entered executor.
If you do not enter an executor number / press an executor button, the cue will be deleted on the main
cue list.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Please .
.
.
Delete Cue it appears on screen 1 the main cue list.
563 of 614