MA lighting dot2 User Manual page 425

Hide thumbs Also See for dot2:

Table of Contents

dot2 User Manual - Views & Windows

Version 1.5 – 2018-11-29

To set a time, tap at the corresponding button and the

To reset all cue timings, tap at

Preset Types Timing

Preset type timings have a higher priority than cue timings. Preset type timings will replace cue timings.

If you have a cue stored with a cue timing and including a preset type timing, the preset type timing will

replace for that preset the cue timing.

You can set a fade or delay time to all available attributes.

To set a time, tap at [Cue] in the timing table. The

To reset all preset types timing, tap at

Encoder Bar Functions

To select the time without decimal place, turn the encoder left or right.

To select the time with decimal place, press

Table of Contents