MA lighting dot2 User Manual page 485

dot2 User Manual - Commands
Version 1.5 – 2018-11-29
English
Hint:
To apply values to the main executor, type only
number.
Press Exec 1 At 50 Please
The executor has now 50 %. This is the same as you would move the fader up to 50 %.
Example 5
Let´s assume, you will trigger executor 1 by a
Press the small Go +
Executor 1 is triggered by a Go command. This is the same as your executor button is assigned with a Go
command.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
.
Go
(=Go ) Exec 1 Please
Exec in the command line without an executor
command.
.
485 of 614