MA lighting dot2 User Manual page 375

dot2 User Manual - Views & Windows
Version 1.5 – 2018-11-29
English
Universe Table with unfitting Fixture
Encoder Bar Functions
Figure 5: Encoder Bar Functions - Select DMX Address...
Universe:
To select an universe in the universe column, turn the encoder left or right.
Test output value:
To set a test output value, turn the encoder left or right.
The DMX value is output directly to the stage. Thus, single DMX channels can be tested before they are patched.
The value is automatically reset when leaving the dialog.
Patch Offset:
To select a patch offset, turn the encoder left or right.
For more information about patch offset, refer to
Address:
To select an address in the table, turn the encoder left or right.
To confirm the selected address, press the encoder.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Add New Fixtures Window.
Figure 4:
375 of 614