MA lighting dot2 User Manual page 234

dot2 User Manual - Views & Windows
Version 1.5 – 2018-11-29
English
1. Press Store
2. Tap Merge .
Figure 4: Values of cue 1 after store merge
The current programmer values are added to the existing cue 1.
Remove
Let´s assume, you will remove fixture ID 2 from the existing cue 1 on the main executor.
Figure 5: Values of cue 1 before store remove
1. Select fixture ID 2 in the
2. Double press
3. Press Store Cue 1
4. Tap Remove .
Figure 6: Values of cue 1 after store remove
The fixture ID 2 is removed from the existing cue 1 on the main executor.
Overwrite
Let´s assume, you will overwrite the cue 1 on the main executor with the current programmer values.
1. Press Store
2. Tap Overwrite .
Cue 1 on the main executor has now the current programmer values. All previous values from the existing cue
are deleted.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
and tap on the main executor in the
fixtures view.
Please . All values from fixture 2 are in the programmer.
and tap on the main executor in the
and tap on the main executor in the
executor bar view.
executor bar view.
executor bar view.
234 of 614