MA lighting dot2 User Manual page 456

Hide thumbs Also See for dot2:

Table of Contents

dot2 User Manual - Commands

Version 1.5 – 2018-11-29

Let´s assume, you will apply the dimmer value to 50 % to the selected fixtures.

At 5 0 Please

All selected fixtures have the dimmer value 50.

Double check the dimmer value in the

If the master fader is not set to 100 %, the values in the Fixture Symbol View are smaller than in the

Fixture Sheet View.

Let´s assume, you will apply a dimmer preset object to all selected fixtures.

1. Go to the

2. Tap a dimmer preset object.

At Preset 1 . 2 Please

All selected fixtures have the selected dimmer preset objects.

Let´s assume, you will apply the values from fixture 1 to fixture 2.

Select at first the fixture which should get the value and then the fixture where the value comes from.

1. Select the fixture which should get the value

2. Select the fixture where the value comes from.

At Fixture 1 Please

Fixture 2 has the value from fixture 1.

Let´s assume, you will apply the executor 3 to the value 50 %.

Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com

Fixtures Sheet

Show Quick Links

Table of Contents