MA lighting dot2 User Manual page 215

dot2 User Manual - Views & Windows
Version 1.5 – 2018-11-29
English
In the shutter/strobe/iris view, you control the the strobe in hertz (Hz), the strobe duration in seconds (s) and the
iris in percent (%).
Strobe
To select the shutter speed in Hz, move the strobe slider up or down.
There are five strobe value buttons right beside the strobe slider (depending on the fixture type).
Open:
Tap to open the shutter.
Close:
Tap to close the shutter.
Strobe:
Tap to use the strobe effect from the fixture (shutter opens and closes).
Pulse:
Tap to use the pulse effect from the fixture.
Random:
Tap to use the random effect from the fixture. The selected fixtures will have strobe along with a derangement.
Strobe Duration
To select the strobe duration in seconds, move the strobe duration slider up or down.
Iris
To select the iris width in percent, move the iris slider up or down.
There are five iris value buttons right beside the iris slider (depending on the fixture type).
Open:
Tap to open the iris.
Close:
Tap to close the iris as much as possible.
Strobe:
Tap to use the strobe effect from the fixture.
Pulse Open:
Tap to use the pulse open effect from the fixture.
Pulse Close:
Tap to use the pulse close effect from the fixture.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
215 of 614