MA lighting dot2 User Manual page 484

dot2 User Manual - Commands
Version 1.5 – 2018-11-29
English
Example 1
Let´s assume, you will select all fixtures used in the cue list of executor 1.
There are two ways to do this.
a) Press Exec 1 Please
b) Press Exec and then tap on the object tile of executor 1 .
All fixtures stored in the cue list of executor one are selected in the
Example 2
Let´s assume, you will delete executor 1 from the actual page of the
There are two ways to do this.
a) Press Delete Exec 1 Please
b) Press Delete Exec
Executor 1 is deleted from the actual page of the executor pool.
Example 3
Let´s assume, you will delete cue 1 from a executor button 1.
There are three different ways to do this.
a) Press Delete 1
b) Press Delete 1
c) Press Delete 1
If a cue list is stored on executor 1, the console ask to
Example 4
Let´s assume, you will set intensity of executor 1 at 50 %.
Important:
The physical fader doesn´t move.
To grab the fader again, you have to move the fader once to the actual value.
The fader is working.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
.
.
and then tap on the object tile of executor 1 .
(= Cue 1) Exec 1 Please
(= Cue 1) and tap on the executor 1 in the
(= Cue 1) and press the respective executor button
fixtures view.
executor
.
executor bar
choose the delete method.
pool.
view.
on the console.
484 of 614