MA lighting dot2 User Manual page 556

dot2 User Manual - Commands
Version 1.5 – 2018-11-29
English
b) Press Store 1
c) Press Store 1
The cue is stored on executor 1.
Example 3
Let´s assume you will store a selection of fixtures as group 1 in the
There are two different ways to do this.
a) Press Store Group 1 Please
b) Press Store and tap on the button of group 1 in the groups view.
The selection of fixtures is stored as group 1 in the groups view.
Example 4
Let´s assume you will store an active dimmer value as dimmer preset 1 in the dimmer
There are two different ways to do this.
a) Press Store Preset 1
b) Press Store and tap on the button of dimmer preset 1 in the dimmer preset pool.
The dimmer value is stored as dimmer preset 1 in the dimmer preset pool.
Example 5
Let´s assume you will store a master speed fader on executor 3.
There are three different ways to do this.
a) Press Store Speed
b) Press Store Speed
c) Press Store Speed
The console asks, to select the speed master type. Tap Master Speed .
A master speed fader is stored on executor 3.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
(=Cue 1) and tap on the executor 1 in the
(=Cue 1) and press the respective executor button e.g.
.
(= dimmer preset pool)
(= Rate) Exec 3 Please
(= Rate) and tap on the executor 3 in the
(= Rate) press the respective executor button e.g.
executor bar view.
groups view.
. 1 (= preset object 1)
.
executor bar
on the console.
on the console.
preset pool.
Please .
view.
556 of 614