MA lighting dot2 User Manual page 233

dot2 User Manual - Views & Windows
Version 1.5 – 2018-11-29
English
Normal
Let´s assume, you will store cue 2.1 between cue 2 and cue 3 with tracking shield.
Fixture 1 (initial
Cue
situation)
1 Dimmer At 50
2 Dimmer At 0
2.1
3 Dimmer At 0 (tracked) Dimmer At 80
1. Press Store Cue 2 . 1
2. Tap Ok . Normal is selected by default.
Cue 2.1 is stored between cue 2 and cue 3. Cue 3 is tracking the dimmer value from fixture 1.
Cue Only
Let´s assume, you will store cue 2.1 between cue 2 and 3 without affect the following cues with tracking values.
Fixture 1 (initial
Cue
situation)
1 Dimmer At 50
2 Dimmer At 0
2.1
3 Dimmer At 0 (tracked) Dimmer At 80
1. Press Store Cue 2 . 1
2. Tap Cue Only and then Ok .
Cue 2.1 is stored between cue 2 and cue 3. Cue 3 has no tracking values from cue 2.1.
Merge
Let´s assume, you will add the current programmer values to the existing cue 1 on the main executor.
Figure 3: Values of cue 1 before store merge
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Fixture 2 (initial
Fixture 1 (normal)
situation)
Dimmer At 50 Dimmer At 50
Dimmer At 100 Dimmer At 0
Dimmer At 33
Dimmer At 33
(tracked)
and tap on the main executor in the
Fixture 2 (initial Fixture 1 (cue
situation) only)
Dimmer At 50 Dimmer At 50
Dimmer At 100 Dimmer At 0
Dimmer At 33
Dimmer At 0
and tap on the main executor in the
Fixture 2
(normal)
Dimmer At 50
Dimmer At 100
Dimmer At 33
Dimmer At 80
executor bar view.
Fixture 2 (cue
only)
Dimmer At 50
Dimmer At 100
Dimmer At 33
Dimmer At 80
executor bar view.
233 of 614