MA lighting dot2 User Manual page 158

dot2 User Manual - Keys
Version 1.5 – 2018-11-29
English
5.44. On key
On can be used to turn on inactive executors or to activate values in your programmer.
Turn On an Executor
If you need to turn on an executor you can press
You can also be specific using the keys:
On Exec 1 Please
On can also be assigned to an executor key using the
of Executors Buttons
Turn On fixtures or values
You can activate values or fixture in your programmer by pressing
If you need to activate an entire fixture you can press
command
On Fixture 1 Please
Will activate all parameters for fixture one in the programmer.
If you need to activate an entire Preset Type in your programmer you can press
preset type in the preset type bar on screen 1 or use keys:
On + 1 Please
Will activate all dimmer values (preset type 1) for the selected fixtures.
Pressing the
Advanced functionality
When you press and hold the
This can be used to call presets.
+ On (gives you the Call command)
This will call the values stored in preset 1 in preset type 4 into your programmer without selecting the fixtures
first.
It can also be used to activate values stored in (and up to) a cue.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
window.
key and a number at the same time will give you fast access to the corresponding Preset Type.
and then the
Preset 4 . 1 Please
On then any key associated to the executor.
Assign command (
On followed by what you want to activate.
On followed by the fixture in a fixture view or using the
On key, you'll get the Call
+ Label ) or the Change Function
On followed by pressing the
command.
158 of 614