MA lighting dot2 User Manual page 473

dot2 User Manual - Commands
Version 1.5 – 2018-11-29
English
Example 2
Let´s assume, you will delete cue 1 from a executor 1.
There are three different ways to do this:
a) Press Delete 1
b) Press Delete 1
c) Press Delete 1
If a cue list is stored on executor 1, the console ask to
Example 3
Let´s assume, you will delete the dimmer preset 1 in the dimmer preset pool.
1. Open the dimmer presets
There are two ways to do this:
a) Press Delete Preset 1 Please
b) Press Delete and tap on preset 1 in the dimmer presets pool.
Preset 1 is deleted from the dimmer preset pool.
If the preset is used in a cue, the console asks to confirm the process.
The connection from the preset to the cue will be lost and the values from the preset will be directly stored in the
cues.
Example 4
Let´s assume, you will unpatch fixture 1 from the DMX universe.
Press Delete and tap on fixture 1 in the fixtures view.
The console asks to confirm the unpatch process.
Tap OK .
Fixture 1 is unpatched.
Double check the patched fixtures in the
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
(= Cue 1) Exec 1 Please
(= Cue 1) and tap on the executor 1 in the
(= Cue 1) and press the respective executor button
pool.
.
.
executor bar
choose the delete method.
Patch and Fixture Schedule.
view.
on the console.
473 of 614