Network Setup Window - MA lighting dot2 User Manual

Hide thumbs Also See for dot2:

Table of Contents

dot2 User Manual - Views & Windows

Version 1.5 – 2018-11-29

6.46. Network Setup Window

To go to the Network Setup, press

Figure 1: Network Setup Window

In this window, you can:

Start, join, stop, or leave a session

Add or remove devices into or from the session

Assign a different DMX out universe to the XLR connectors (tab consoles and DMX Nodes)

The session status is independent from the show file.

Below the title bar is the session status displayed.

By default, the console is standalone. To connect other devices to the console, you need to start a session first.

To start a session, tap at Start new or join an existing session . The

If the console is in a session, the session number is displayed in the session status text.

Connected Devices Area

In the connected devices area are all connected and previous connected devices displayed.

The devices are organized in the tabs:

Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com

and tap at Sessions .

select session number window

Show Quick Links

Table of Contents