MA lighting dot2 User Manual page 408

Hide thumbs Also See for dot2:

Table of Contents

dot2 User Manual - Views & Windows

Version 1.5 – 2018-11-29

Wrap Around allows the sequence to return to the first cue when executing Go after played back the last cue of a

To set the off time in seconds, use the plus or minus or the numbered keys on the console.

If an executor has an off time and you turn the executor off by using

the executor turns off in the selected off time.

If an executor has an off time and you turn the executor off by using the fader, all attributes expect for the

dimmer turns off in the selected off time after you reached the 0 % status of the fader.

If an executor is a chaser and an off time is selected, the off time changes into an on and off time. The chasers

start in the selected off time and end in the selected off time.

To select the timecode signal for this executor, tap the green timecode field.

There are three timecode signal options there:

Off = No timecode signal

Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com

and pressing the executor button

Show Quick Links

Table of Contents