MA lighting dot2 User Manual page 589

dot2 User Manual - Glossary
Version 1.5 – 2018-11-29
English
O
Out Delay:
Wait time for dimmer values going to a lower intensity level.
P
Pan:
Horizontal movement axis of an fixture. Refer, to
Presets:
There are nine preset types to control from the console. Refer to,
Priority:
Some values have a higher priority than others. In other words, they will not be overwritten by those with a lower
priority. The programmer, for instance, has a higher priority than an executor.
Programmer:
Is a container with the current selection of fixtures and values of manual adjusted attributes. Those values are
red values. Refer to,
Program Time Master:
The program time master controls the fade times of all program values and effects, between 0 and 10 seconds.
This affects both, the adding of new values into the programmer, and the removing of values from the
programmer with the
The program time master is a fade executor. Refer to,
R
Rpm (revolution per minute):
Rotationspeed of a gobowheel in the unit revolution per minute, refer to
S
Shutter:
Fast open and close of the light output of a fixture type.
SMPTE (society of motion picture and television engineers):
Is a timecode to synchronize different devices from different manufacturers in the audio and video technology.
Refer to, Select Trig View.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Value colors.
Clear key.
Position Preset View.
Preset Pool View
Empty Executor Window.
Gobo Preset Type
and Preset Type Bar.
View.
589 of 614