MA lighting dot2 User Manual page 480

Hide thumbs Also See for dot2:

Table of Contents

dot2 User Manual - Commands

Version 1.5 – 2018-11-29

Edit Exec 1 Please

and then the respective executor button

The cues view of executor 1 is visible at screen 1.

For this function, you can also use the

Let´s assume, you will edit cue 2 on executor 1.

The fixtures from cue 2 are selected in the fixtures view and the values are active in the programmer (red values

with red background).

The tracked values from cue 1 are displayed in red.

Let´s assume, you will edit the current active cue on the main executor.

and then the large

The fixtures from the current cue are selected and the values are active in the programmer (red values with red

background).

The tracked values are displayed in red.

If no cue on the main executor is active, cue 1 from the main executor will be loaded in the programmer.

Let´s assume, you will edit a preset 1 of the position presets.

1. Open the position

The fixtures stored in preset 1 are selected in the fixtures view and the stored values are active in the

Let´s assume, you will edit a group 1 in the

There are two ways to do this:

Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com

Exec 1 Please

and tap on preset 1 in the position presets pool.

Show Quick Links

Table of Contents