MA lighting dot2 User Manual page 380

dot2 User Manual - Views & Windows
Version 1.5 – 2018-11-29
English
To delete exported fixture types from the internal desk, a software update or factory reset is necessary. Refer to,
How to update the console?
To switch between the symbol view
To delete unused fixture types from the show file, tap the trash can
To confirm the changes tap OK
To leave the Select Fixture Type... Window, tap
For more information about add and patch fixtures, see
Symbol View
To go to the symbol view, tap the symbol view icon
The fixture types are fielded in tiles.
A selected fixture type has a white frame around the tile.
The number in the upper left corner of the tile, displays the fixture type number in the current show file.
In bold white font is the fixture type displayed.
Below the fixture type is the manufacturer displayed.
Sheet View
To go to the sheet view, tap the sheet view icon
Figure 2: Select Fixture Type... Window - Sheet View
The table has nine columns with information to the fixture type.
Cells with a bright gray background are editable.
Cells with a dark gray background are read only.
1. No
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
and How to reset the console?.
and the sheet view
.
.
in the title bar.
, tap on the respective icon in the
.
how to add and patch fixtures?
in the title bar.
title bar.
380 of 614