MA lighting dot2 User Manual page 405

Hide thumbs Also See for dot2:

Table of Contents

dot2 User Manual - Views & Windows

Version 1.5 – 2018-11-29

Figure 4: Super Priority (!) displayed in the fixture sheet view

Figure 5: Super Priority (!) displayed in an executor

Off on Overwritten

To enable this function, tap the prohibition sign.

This function automatically deactivates the executor if another executor took over the control with all attributes.

This means that the executor no longer has control over any of the attributes.

Swop Protect

To turn swop protect on, tap the tick mark.

If swop protect is on, the dimmer values of this executor are not set to zero when an other swop executor is on.

Restart Mode

To select the restart mode, tap

There are three different restart modes there:

First (default): The executor restarts the sequence using the first cue.

Current: The executor restarts the sequence using the current cue.

Next: The executor restarts the sequence using the next cue – depending on where the sequence stopped

Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com

Show Quick Links

Table of Contents