MA lighting dot2 User Manual page 60

Hide thumbs Also See for dot2:

Table of Contents

dot2 User Manual - How to...

Version 1.5 – 2018-11-29

Load your dot2 show in grandMA2

You can load your dot2 show on a grandMA2 (from grandMA2 version 3.1). Once your show have been loaded in

grandMA2, then you cannot take it back to the dot2.

The easiest way is to save your show is on a USB drive. Then take the same USB drive and connect it into the

grandMA2. This will create the correct folder structure on the USB drive. Then you'll need to connect the USB drive

to a computer and manually move or copy the show file from the show folder inside the dot2 folder to the show

folder in the gma2 folder. Then plug the USB drive back into the grandMA2 and load the show from the drive.

You'll get a grandMA2 show that have all the show data from the dot2, but all the areas that are not defined by

the dot2 will be the factory defaults.

You can load a dot2 show file in the grandMA2 - but not a grandMA2 show file in the dot2!

For more information on how to load a show that was preprogramed in a previous version and saved

see the info box in the topic Backup.

Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com

Show Quick Links

Table of Contents