MA lighting dot2 User Manual page 211

dot2 User Manual - Views & Windows
Version 1.5 – 2018-11-29
English
Encoder Bar Functions
Figure 5: Encoder Bar Add New Fixtures Window
Type:
To scroll in the drop-down list from the edit line Type, turn the encoder left or right.
To open the Import Fixture Type
Quantity:
To select the quantity in the edit line Quantity, turn the encoder left or right.
Fixture ID:
To select the fixture ID in the edit line ID, turn the encoder left or right.
To open the Select Fixture ID(s)
Patch Break 1:
To select the DMX address, turn the encoder left or right.
To open the Select DMX Address...
Patch Offset:
To select the patch offset, press and hold
To open the calculator
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Window, press or tap the encoder.
Window, press or tap the encoder.
Window, press or tap the encoder.
and turn the encoder left or right.
to select the patch offset, press and hold and press the encoder.
211 of 614