MA lighting dot2 User Manual page 79

Hide thumbs Also See for dot2:

Table of Contents

dot2 User Manual - How to...

Version 1.5 – 2018-11-29

Running the chaser

You can start the chaser by moving the fader from 0% and above 0%, this will run the chaser. You can also use a

command to run it in the direction you have set. If you use the

but in the opposite direction. The

command will stop the chaser. The

You can assign all these commands to keys associated with the chaser or you can use them temporary by

pressing the function key on the dot2 and then one of the keys associated with the chaser.

Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com

command will toggle the current running status of the chaser.

command will run the Chaser as long as you keep the key pressed.

command then the chaser runs,

Show Quick Links

Table of Contents