MA lighting dot2 User Manual page 33

dot2 User Manual - What are...
Version 1.5 – 2018-11-29
English
This is the final result:
Cue
number
1
2
3
4
5
6
This is the principle behind Tracking Shield:
The system looks for dimmer values that change from 0 to above 0 for each single fixture. If there's a change in
the dimmer (from 0 to a value above), then it stores the tracked values before creating the new values in the
previous cues, thus preventing the cue output from changing because of the tracking.
The dimmer value in cue 5 is a tracked value, even though we store both 4 and 5 as Cue Only because of a
function called AutoUnblock. It's the same mechanism that made the dimmer in cue 6 a tracked value after we
stored cue 3. AutoUnblock will automatically remove unnecessary stored values after each store operation.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Fixture 1 Fixture 1
Dim Position
100 Singer
0 Singer
100 Drummer
0 Drummer
0 Drummer
100 Singer
33 of 614