MA lighting dot2 User Manual page 156

dot2 User Manual - Keys
Version 1.5 – 2018-11-29
English
5.43. Off key
Off can be used to turn off active executors or to remove values from your programmer.
Off an executor
If you need to turn off an executor you can press
You can also be specific using the keys:
Off Exec 1 Please
Off can also be assigned to an executor key using the
of Executors Buttons
Off fixtures or values
You can remove values or fixture from your programmer by pressing
If you need to remove an entire fixture you can press
command
Off Fixture 1 Please
Will remove fixture one from the programmer.
You can remove an entire Preset Type from your programmer for the currently selected fixtures by pressing
followed by pressing the preset type in the preset type bar on screen 1 or use keys:
Off + 1 Please
This command will remove all dimmer values (preset type 1) in the programmer for the selected fixtures.
When you combine the
The Off window
You can open an Off window
off and reset different elements like the executors, special masters and the programmer.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
window.
key with numbers then you have direct access to the preset types.
by pressing the
Off then any key associated to the executor.
Assign command (
Off followed by what you want to remove.
Off followed by the fixture in a fixture view or using the
key together with the Off
+ Label ) or the Change Function
key. In the off window you can turn
Off
156 of 614