Store And Recall - R&S NGM202 User Manual

®
R&S NGL200/NGM200
Table 6-6: File manager action
Action

6.14 Store and Recall

Upon power-up, the instrument loads the last stored settings from internal memory
location. Auto saved parameters are also applied during startup.
The R&S NGL/NGM output states of all channels (Ch1, Ch2) are disabled when the
recall function is activated.
Auto saved instrument settings
Auto saved of the instrument settings is applied when any of the following parameters
are changed:
●
Chapter 6.16, "General Instrument
●
USB connection mode
●
Ethernet settings
In addition of the auto saved instrument settings, the following instrument settings are
stored or recalled in the internal memory:
●
Set voltage and current level
●
Settings in the Protection
●
Arbitrary
●
User button key function
●
Data Logging settings
●
GPIB Address
1. Press [Settings] key.
The R&S NGL/NGM displays the device/channel menu window.
2. Select the "Device" tab to configure file settings for store and recall function.
The R&S NGL/NGM displays the device menu.
3. Select "Save/Recall Device Settings".
The R&S NGL/NGM loads the "Save/Recall Device Settings" dialog.
User Manual 1178.8736.02 ─ 06
Function,
settings, Ramp settings
Description
Copy from internal memory to USB.
Copy from USB to internal memory.
Delete the selected file.
Settings", on page 82
Safety Limits
Instrument Functions
Store and Recall
74