Alcatel-Lucent 7750 SR Manual page 989

mac-address — Specifies the 48-bit MAC address for the IPv6-to-MAC address mapping in the form
backup
Syntax [no] backup ip-address
Context config>service>ies>if>ipv6>vrrp
Description
This command configures virtual router IP addresses for the interface.
init-delay
Syntax init-delay seconds
no init-delay
Context config>service>ies>if>ipv6>vrrp
Description This command configures a VRRP initialization delay timer.
Default
no init-delay
Parameters
seconds — Specifies the initialization delay timer for VRRP, in seconds.
mac
Syntax mac mac-address
no mac
Context config>service>ies>if>ipv6>vrrp
Description This command assigns a specific MAC address to an IES IP interface.
The no form of the command returns the MAC address of the IP interface to the default value.
Default
The physical MAC address associated with the Ethernet interface that the SAP is configured on (the
default MAC address assigned to the interface, assigned by the system).
Parameters
mac-address — Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or
7750 SR OS Services Guide
Values x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
prefix-length [1..128]
aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC
addresses.
Values
1 — 65535
aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are
any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
IES Service Configuration Commands
Page 989