Alcatel-Lucent 7750 SR Manual page 1000

IES Interface Commands
static-host
Syntax static-host ip ip/did-address [mac ieee-address] [create]
static-host mac ieee-address [create]
no static-host [ip ip-address>] mac ieee-address>
no static-host all [force]
no static-host ip ip-address
Context config>service>ies>if>sap
config>service>ies>subscriber-inf>group-inf>sap
Description
This command configures a static host on this SAP.
Parameters
ip ip-address — Specifies the IPv4 unicast address.
mac ieee-address — Specify this optional parameter when defining a static host. Every static host
force — Specifies the forced removal of the static host addresses.
sla-profile sla-profile-name — This optional parameter is used to specify an existing SLA profile
ancp-string
Syntax ancp-string ancp-string
no ancp-string
Context config>service>ies>if>sap>static-host
config>service>ies>subscriber-inf>group-inf>sap>static-host
Description This command specifies the ANCP string associated to this SAP host.
Page 1000
If the customer-site-name does not exist, it is assumed that an attempt is being made to create a
site of that name in the customer ID context. The success of the command execution depends on
the following:
• The maximum number of customer sites defined for the chassis has not been met.
• The customer-site-name is valid.
• The create keyword is included in the command line syntax (if the system requires it).
When the maximum number of customer sites has been exceeded a configuration error occurs;
the command will not execute and the CLI context will not change.
If the customer-site-name is invalid, a syntax error occurs; the command will not execute and the
CLI context will not change.
Values
Valid names consist of any string up to 32 characters long composed of printable, 7-
bit ASCII characters. If the string contains special characters (#, $, spaces, etc.), the
entire string must be enclosed within double quotes.
definition must have at least one address defined, IP or MAC.
name to be associated with the static subscriber host. The SLA profile is configured in the
config>subscr-mgmt>sla-profile context.
7750 SR OS Services Guide