Alcatel-Lucent 7750 SR Manual page 829

PBB Service Commands
VPLS Service Commands
vpls
Syntax vpls service-id customer customer-id vpn vpn-id [m-vpls] [bvpls | i-vpls] [create]
vpls service-id
no vpls service-id
Context config>service
Description This command creates or edits a Virtual Private LAN Services (VPLS) instance. The vpls command
is used to create or maintain a VPLS service. If the service-id does not exist, a context for the service
is created. If the service-id exists, the context for editing the service is entered.
A VPLS service connects multiple customer sites together acting like a zero-hop, layer 2 switched
domain. A VPLS is always a logical full mesh.
When a service is created, the create keyword must be specified if the create command is enabled in
the environment context. When a service is created, the customer keyword and customer-id must be
specified and associates the service with a customer. The customer-id must already exist having been
created using the customer command in the service context. Once a service has been created with a
customer association, it is not possible to edit the customer association. The service must be deleted
and recreated with a new customer association.
Once a service is created, the use of the customer customer-id is optional for navigating into the
service configuration context. Attempting to edit a service with the incorrect customer-id specified
will result in an error.
More than one VPLS service may be created for a single customer ID.
By default, no VPLS instances exist until they are explicitly created.
The no form of this command deletes the VPLS service instance with the specified service-id. The
service cannot be deleted until all SAPs and SDPs defined within the service ID have been shutdown
and deleted, and the service has been shutdown.
service-id — The unique service identification number identifying the service in the service domain.
vpls custome
customer customer-id — Specifies the customer ID number to be associated with the service. This
vpls vpn
vpn vpn-id — Specifies the VPN ID number which allows you to identify virtual private networks
7750 SR OS Services Guide
This ID must be unique to this service and may not be used for any other service of any type. The
service-id must be the same number used for every 7750 SR on which this service is defined.
Values 1 — 2147483648
parameter is required on service creation and optional for service editing or deleting.
Values 1 — 2147483647
(VPNs) by a VPN identification number.
PBB Service Commands
Page 829