Pbb Elan With Mmrp - M:1 Model; Pbb Using G.8031 Protected Ethernet Tunnels - Alcatel-Lucent 7750 SR Manual

PBB ELAN with MMRP - M:1 model

This section describes a configuration example for B-VPLS with MMRP:
CLI Syntax: config>service# vpls 200 customer 1 b-vpls create

PBB using G.8031 Protected Ethernet Tunnels

The following displays PBB configuration examples:
Ethernet links on BEB1:
BEB1 to BEB1 L1:
BEB1 to BCB1 L1: 1/1/1 – Member port of LAG-emulation ET1, terminate ET3
BEB1 to BCB1 L2: 2/1/1 – Member port of LAG-emulation ET1
BEB1 to BCB1 L3: 3/1/1 - Member port of LAG-emulation ET1
BEB1 to BCB2:4/1/1 – terminate ET3
*A:7750_ALU>config>eth-tunnel 1
7750 SR OS Services Guide
description "This is a B-VPLS."
mrp
flood-time 3
no shutdown
sap 3/1/3:33 create
description "B-VPLS SAP"
spoke-sdp 2:22 create
description "B-VPLS SDP"
description "LAG-emulation to BCB1 ET1"
protection-type loadsharing
ethernet
mac 00:11:11:11:11:12
encap-type dot1q
exit
ccm-hold-time down 5 up 10 // 50 ms down, 1 sec up
lag-emulation
access adapt-qos distribute
path-threshold 1
exit
path 1
member 1/1/1
control-tag 0
eth-cfm
...
exit
no shutdown
exit
path 2
member 2/1/1
control-tag 0
eth-cfm
Virtual Private LAN Services
Page 817