Alcatel-Lucent 7750 SR Manual page 965

scheduling-class
Syntax [no] scheduling-class class-id
Context config>service>ies>interface>sap>frame-relay
config>service>vprn>interface>sap>frame-relay
config>service>epipe>sap>frame-relay
config>service>ipipe>sap>frame-relay
config>service>fpipe>sap>frame-relay
config>service>vpls>sap>frame-relay
Description
This command assigns a Frame Relay scheduling class for a Frame Relay SAP. The scheduling class
dictates which queue the frame or frame fragments are stored in FRF.12 end-to-end fragmentation,
FRF.12 UNI/NNI link fragmentation and MLFR applications.
Default
3
Parameters
class-id — Specifies the Frame Relay scheduling class number.
host
Syntax [no] host ip ip-address [mac ieee-address]] [subscriber sub-ident-string] [sub-profile sub-
profile-name] [sla-profile sla-profile-name] [ancp-string ancp-string]
no host {[ip ip-address] [mac ieee-address]}
no host all
Context config>service>ies>if>sap
config>service>ies>sub-if>grp-if>sap
Description
This command creates a static subscriber host for the SAP. Static subscriber hosts may be used by the
system for various purposes. Applications within the system that make use of static host entries
include anti-spoof filters and ARP cache population.
Multiple static hosts may be defined on the SAP. Each host is identified by either a source IP address,
a source MAC address or both a source IP and source MAC address. Every static host definition must
have at least one address defined, IP or MAC.
Static hosts can exist on the SAP even with anti-spoof and ARP populate features disabled. When
enabled, each feature has different requirements for static hosts.
anti-spoof — When enabled, this feature uses static and dynamic host information to populate entries
arp-populate — When enabled, this feature uses static and dynamic host information to populate
Attempting to define a static subscriber host that conflicts with an existing DHCP Lease State Table
7750 SR OS Services Guide
Values
0 — 3
into an anti-spoof filter table. The anti-spoof filter entries generated will be of the same type as
specified in the anti-spoof type parameter. If the SAP anti-spoof filter is defined as ip, each static
host definition must specify an IP address. If the SAP anti-spoof filter is defined as ip-mac, each
static host definition must specify both an IP address and MAC address. If definition of a static
host is attempted without the appropriate addresses specified for the enabled anti-spoof filter, the
static host definition will fail.
entries in the system ARP cache.
IES Service Configuration Commands
Page 965