Alcatel-Lucent 7750 SR Manual page 737

Description This command controls the frequency with which the LeaveAll state machine generates LeaveAll
PDUs. The timer is required on a per-Port, per-MRP Participant basis. The Leave All Period Timer is
set to a random value, T, in the range LeaveAllTime<T<1.5*leave-all-time when it is started. Refer to
IEEE 802.1ak-2007 section 10.7.4.3.
Default
100
Parameters value — [60-300] tenths of a second
mrp-policy
Syntax [no] mrp-policy policy-name
Context config>service>vpls>sap>mrp
config>service>vpls>spoke-sd>mrp
config>service>vpls>mesh-sdp>mrp
Description This command instructs MMRP to use the mrp-policy specified in the command to control which
Group BMAC attributes will be declared and registered on the egress SAP/Mesh-SDP/Spoke-SDP.
The Group BMACs will be derived from the ISIDs using the procedure used in the PBB solution. The
Group MAC = standard OUI with the last 24 bits being the ISID value. If the policy-name refers to a
non-existing mrp-policy the command should return error. Changes to a mrp-policy are aloowed and
applied to the SAP/SDPs under which the policy is referenced.
Default no mrp-policy is defined
Parameters
policy-name — Specifies the redirect policy name. Allowed values are any string up to 32 characters
periodic-time
Syntax [no] periodic-time value
Context config>service>vpls>sap>mrp
config>service>vpls>spoke-sdp>mrp
config>service>vpls>mesh-sdp>mrp
Description
This command controls the frequency the PeriodicTramsmission state machine generates periodic
events if the Periodic Transmission Timer is enabled. The timer is required on a per-Port basis. The
Periodic Transmissing Timer is set to one second when it is started.
Default 10
Parameters
value — [10-100] tenths of a second
7750 SR OS Services Guide
long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
Virtual Private LAN Services
Page 737