Alcatel-Lucent 7750 SR Manual page 945

Default no bfd
Parameters transmit-interval — Sets the transmit interval for the BFD session.
receive receive-interval — Sets the receive interval for the BFD session.
multiplier multiplier — Set the multiplier for the BFD session.
echo-receive echo-interval — Sets the minimum echo receive interval, in milliseconds, for the BFD
type cpm-np — Specifies that the type is cpm-np.
cflowd
Syntax cflowd {acl | interface}
no cflowd
Context config>service>ies>interface
Description
This command enables cflowd to collect traffic flow samples through a router for analysis.
cflowd is used for network planning and traffic engineering, capacity planning, security, application
and user profiling, performance monitoring, usage-based billing, and SLA measurement. When
cflowd is enabled at the interface level, all packets forwarded by the interface are subjected to
analysis according to the cflowd configuration.
Default
no cflowd
Parameters
ACL — cflowd configuration associated with a filter.
interface — cflowd configuration associated with an IP interface.
7750 SR OS Services Guide
Values
100 — 100000
10 — 100000 (see Important Notes above)
Default 100
Values
100 — 100000
10 — 100000 (see Important Notes above)
Default
100
Values 3— 20
Default
3
session.
Values
100 — 100000
10 — 100000 (see Important Notes above)
Default
100
IES Service Configuration Commands
Page 945