Alcatel-Lucent 7750 SR Manual page 740

Virtual Private LAN Services
mode
Syntax mode mode
Context config>service>vpls>pim-snooping
Description
This command
Parameters mode — Specifies PIM snooping mode.
propagate-mac-flush
Syntax [no] propagate-mac-flush
Context config>service>vpls
Description
This command specifies whether MAC flush messages received from the given LDP are propagated
to all spoke and mesh SDPs within the context of this VPLS service. The propagation will follow the
split-horizon principle and any data-path blocking in order to avoid the looping of these messages.
Default no propagate-mac-flush
send-queries
Syntax [no] send-queries
Context config>service>vpls>sap>igmp-snooping
config>service>vpls>spoke-sdp>snooping
config>service>vpls>mesh-sdp>snooping
config>service>vpls>sap>mld-snooping
config>service>vpls>spoke-sdp>mld-snooping
config>service>vpls>mesh-sdp>mld-snooping
Description This command specifies whether to send IGMP general query messages on the SAP or SDP.
When send-queries is configured, all type of queries generate ourselves are of the configured version.
If a report of a version higher than the configured version is received, the report will get dropped and
a new wrong version counter will get incremented.
If send-queries is not configured, the version command has no effect. The version used will be the
version of the querier. This implies that, for example, when we have a v2 querier, we will never send
out a v3 group or group-source specific query when a host wants to leave a certain group.
Page 740
Values 0 — 300
Default
90
sets the PIM snooping mode to proxy or plain snooping.
Values snooping, proxy
Default proxy
7750 SR OS Services Guide