Alcatel-Lucent 7750 SR Manual page 846

Show Commands
mep
Syntax mep mep-id domain md-index association ma-index [loopback] [linktrace]
Context show>eth-cfm>domain
Description This command displays Maintenance Endpoint (MEP) information.
Parameters
mep-id — Specifies the maintenance association end point identifier.
md-index — Specifies the maintenance domain (MD) index value.
ma-index — Specifies the MA index value.
loopback — Displays loopback information for the specified MEP.
linktrace — Displays linktrace information for specified MEP.
Sample Output
*A:alcag1-R6# oam eth-cfm loopback 00:af:af:af:af:af mep 51 domain 1 association 1
eth-cfm Loopback Test Initiated: Mac-Address: 00:af:af:af:af:af, out sap: 1/2/9:5
Sent 1 packets, received 1 packets [0 out-of-order, 0 Bad Msdu] -- OK
*A:alcag1-R6#
*A:alcag1-R6# oam eth-cfm linktrace 00:af:af:af:af:af mep 51 domain 1 association 1
Index Ingress Mac
----- -------------------- -------------------- ---------- ----------
1
----- -------------------- -------------------- ---------- ----------
No more responses received in the last 5 seconds.
*A:alcag1-R6#
i-vpls
Syntax i-vpls
Context show>service>id
Description
Displays I-VPLS services associated with the B-VPLS service. This command only applies when the
service is a B-VPLS.
Sample Output
*A:SetupCLI# show service id 2002 i-vpls
================================================================
Related iVpls services for bVpls service 2002
================================================================
iVpls SvcId
Page 846
Values 1 — 8191
Values
1 — 4294967295
Values 1 — 4294967295
00:00:00:00:00:00
Oper ISID
Egress Mac Relay
00:AF:AF:AF:AF:AF rlyHit
Admin
7750 SR OS Services Guide
Action
terminate
Oper