Alcatel-Lucent 7750 SR Manual page 999

Parameters sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
port-id — Specifies the physical port ID in the slot/mda/port format.
create — Keyword used to create a SAP instance. The create keyword requirement can be enabled/
multi-service-site
Syntax multi-service-site customer-site-name
no multi-service-site customer-site-name
Context config>service>ies>if>sap
config>service>ies>sub-if>grp-if>sap
Description
This command creates a new customer site or edits an existing customer site with the customer-site-
name parameter. A customer site is an anchor point to create an ingress and egress virtual scheduler
hierarchy. When a site is created, it must be assigned to a chassis slot or port with the exception of the
7750 SR-1
the scheduler names contained in each policy are created according to the parameters defined in the
policy. Multi-service customer sites exist for the sole purpose of creating a virtual scheduler hierarchy
and making it available to queues on multiple Service Access Points (SAPs).
The scheduler policy association with the customer site normally prevents the scheduler policy from
being deleted until after the scheduler policy is removed from the customer site. The multi-service-
site object will generate a log message indicating that the association was deleted due to scheduler
policy removal.
When the multi-service customer site is created, an ingress and egress scheduler policy association
does not exist. This does not prevent the site from being assigned to a chassis slot or prevent service
SAP assignment. After the site has been created, the ingress and egress scheduler policy associations
can be assigned or removed at any time.
Default
None — Each customer site must be explicitly created.
Parameters customer-site-name: — Each customer site must have a unique name within the context of the
7750 SR OS Services Guide
Command Descriptions on page 1933 for command syntax.
If the card in the slot has Media Dependent Adapters (MDAs) installed, the port-id must be in the
slot_number/MDA_number/port_number format. For example 1/1/1 specifies port 1 on MDA 1
in slot 1.
The port-id must reference a valid port type. When the port-id parameter represents SONET/
SDH and TDM channels, the port ID must include the channel ID. A period "." separates the
physical port from the channel-id. The port must be configured as an access port.
If the SONET/SDH port is configured as clear-channel then only the port is specified.
disabled in the environment>create context.
in which the slot is set to 1. When scheduler policies are defined for ingress and egress,
customer. If customer-site-name already exists for the customer ID, the CLI context changes to
that site name for the purpose of editing the site scheduler policies or assignment. Any
modifications made to an existing site will affect all SAPs associated with the site. Changing a
scheduler policy association may cause new schedulers to be created and existing queues on the
SAPs to no longer be orphaned. Existing schedulers on the site may cease to exist, causing
queues relying on that scheduler to be orphaned.
IES Service Configuration Commands
Page 999