Hpe 3Par Storeserv Management Console - HPE 3PAR StoreServ 7000 Storage Service And Upgrade Manual

Interfaces with HPE 3PAR SP 4.x:
IMPORTANT:
HPE 3PAR SP 4.x requires HPE 3PAR OS 3.2.2.
• HPE 3PAR Service Processor Onsite Customer Care (SPOCC): The HPE 3PAR SPOCC interface
is accessed when you log in to the HPE 3PAR SP and is a web-based graphical user interface (GUI)
that is available for support of the HPE 3PAR StoreServ Storage system and its HPE 3PAR SP. HPE
3PAR SPOCC is the web-based alternative to accessing most of the features and functionality that are
available through the HPE 3PAR SPMAINT.
• HPE 3PAR SPMAINT interface: The HPE 3PAR SPMAINT interface is for the support (configuration
and maintenance) of both the storage system and its HPE 3PAR SP. Use HPE 3PAR SPMAINT as a
backup method for accessing the HPE 3PAR SP. The HPE 3PAR SPOCC is the preferred access
method. An HPE 3PAR SPMAINT session can be started either from the menu option in HPE 3PAR
SPOCC, through a connection to the HPE 3PAR SP through a Secure Shell (SSH), or logging in to the
Linux console; however, only one HPE 3PAR SPMAINT session is allowed at a time.
CAUTION:
Many of the features and functions that are available through HPE 3PAR SPMAINT can
adversely affect a running system. To prevent potential damage to the system and irrecoverable
loss of data, do not attempt the procedures described in this manual until you have taken all
necessary safeguards.
• HPE 3PAR CPMAINT interface: The HPE 3PAR CPMAINT terminal user interface is the primary user
interface for the support of the HPE 3PAR Secure Service Agent as well as a management interface
for the HPE 3PAR Policy Server and Collector Server.

HPE 3PAR StoreServ Management Console

The HPE 3PAR StoreServ Management Console (SSMC) provides browser-based consoles (interfaces)
for monitoring an HPE 3PAR StoreServ Storage system. The HPE 3PAR SSMC procedures in this guide
assume that the storage system to be serviced has already been added to the HPE 3PAR SSMC and is
available for management through logging in to the HPE 3PAR SSMC Main Console. If that is not the
case, you must first add the storage system to the HPE 3PAR SSMC by logging in to the HPE 3PAR
SSMC Administrator Console.
HPE 3PAR SSMC guidelines:
• The HPE 3PAR SSMC must not be installed the HPE 3PAR Service Processor (SP) or a storage
system running a virtual SP, and instead the HPE 3PAR SSMC must be installed on a separate
customer system running Linux or Windows OSs.
• The HPE 3PAR SSMC should be run locally from the storage system on which it is installed.
HPE 3PAR SSMC documentation:
The following documents are available at the Hewlett Packard Enterprise Information Library Storage
website:
www.hpe.com/info/storage/docs
HPE 3PAR StoreServ Management Console 57