Upgrading To Add Drives-Sp 5.X - HPE 3PAR StoreServ 7000 Storage Service And Upgrade Manual

Figure 20: Installing an HPE 3PAR StoreServ 7000 Storage Bezel
13. Follow the return instructions provided with the replacement component.
Upgrading to add Drives—SP 5.x
This procedure is for the upgrade of installing HPE 3PAR StoreServ 7000 Storage Drives using HPE
3PAR Service Processor (SP) 5.x.
Procedure
Preparation:
1. Unpack the component and place on an ESD safe mat.
2. Connect to the HPE 3PAR Service Processor (SP)
Browse to the IP address:
https://<sp_ip_address>:8443
3. Log in to the HPE 3PAR SP.
With the admin account credentials, the HPE 3PAR SP Service Console (SC) interface displays.
4. Initiate a maintenance window that stops the flow of system alerts from being sent to HPE by setting
Maintenance Mode.
a. From the SC interface, select Systems.
b. Select Actions > Set maintenance mode, and then follow the instructions in the dialog that
opens.
Upgrading to add Drives—SP 5.x 39