HPE 3PAR StoreServ 7000 Storage Service And Upgrade Manual page 73

file Example 1
File node:2 Behavior altering file "manualstartup" exists created on Oct 7
14:16
file Suggested Action 1
After understanding why the files are present, the file should be removed to prevent unwanted behavior.
As root on a Controller Node, remove the file using the UNIX rm command.
Known condition: some undesirable touch files are not being detected (bug 45661).
file Example 2
Component -----------Summary Description----------- Qty
File Admin Volume is not mounted
file Suggested Action 2
Each Controller Node has a file system link so that the admin volume can be mounted if that Controller
Node is the master Controller Node. This exception is reported if the link is missing or if the System
Manager (sysmgr) is not running at the time. For example, sysmgr might have been restarted manually,
due to error or during a change of master-nodes. If sysmgr was restarted, it tries to remount the admin
volume every few minutes.
Every Controller Node should have the following file system link so that the admin volume can be
mounted, should that Controller Node become the master Controller Node:
# onallnodes ls -l /dev/tpd_vvadmin
Node 0:
lrwxrwxrwx 1 root root 12 Oct 23 09:53 /dev/tpd_vvadmin -> tpddev/vvb/0
Node 1:
ls: /dev/tpd_vvadmin: No such file or directory
The corresponding alert when the admin volume is not properly mounted is as follows:
Message Code: 0xd0002
Severity : Minor
Type : PR transition
Message : The PR is currently getting data from the internal drive on
node 1, not the admin volume. Previously recorded alerts will not be
visible until the PR transitions to the admin volume.
If a link for the admin volume is not present, it can be recreated by rebooting the Controller Node.
file Example 3
1
Troubleshooting 73