Finding A Device Eligible For Dynamic Parallel Access Volumes Management - HPE XP7 User Manual

6
Command ===>
Specify or revise the values below.
Configuration ID . : LABSYSTM
Device number
Device type
Parameter/
Feature
OFFLINE
DYNAMIC
LOCANY
WLMPAV
SHARED
SHAREDUP
***************************** Bottom of data
******************************
F1=Help
F7=Backward
The base or alias device is defined.
Finding a device eligible for dynamic Parallel Access
Volumes management
The Hardware Configuration Definition (HCD) program is used to view configuration parameters. This
information is useful for determining if a specific device is eligible for dynamic PAV management by WLM.
Procedure
1. From the ISPF/PDF primary options menu, select the HCD option.
2. On the HCD main screen, verify the name of the IODF or IODF.WORK I/O definition file you want to
use, and then select menu item 1, Define, modify, or view configuration data.
Command ===>
________________________________________________________________
Select one of the following.
1_ 0.
1.
2.
3.
. . : 8101
. . . : 3390B
Value P Req.
No
Yes
No
Yes
Yes
No
F2=Split
F8=Forward
z/OS V1.11 HCD
Edit profile options
Define, modify, or view configuration data
Activate or process configuration data
Print or compare configuration data

Finding a device eligible for dynamic Parallel Access Volumes management

Scroll ===> CSR
OS Configuration List (EDT's)
Number of devices
Description
Device considered online or offline at IPL
Device supports dynamic configuration
UCB can reside in 31 bit storage
Device supports work load manager
Device shared with other syst
Shared when system physically partitioned
F3=Exit
F9=Swap
Hardware Configuration
: 1
F4=Prompt F5=Reset
F12=Cancel F22=Command -
Row 1 of
29