Snmp - HPE 3PAR StoreServ 7000 Storage Service And Upgrade Manual

•
showrcopy
•
showrcopy -d
•
showport -rcip
•
showport -rcfc
•
shownet -d
•
controlport rcip ping

snmp

Displays issues with SNMP. Attempts the showsnmpmgr command and reports errors if the CLI returns
an error.
Format of Possible snmp Exception Messages
SNMP -- <err>
snmp Example
Component -Identifier- ----------Detailed Description---------------
SNMP --
snmp Suggested Action
Any error message that can be produced by showsnmpmgr might be displayed.
sp
Checks the status of the Ethernet connection between the Service Processor (SP) and nodes.
This can only be run from the SP because it performs a short Ethernet transfer check between the SP
and the storage system.
Format of Possible sp Exception Messages
Network SP->InServ "SP ethernet Stat <stat> has increased too quickly check SP network
settings"
sp Example
Component -Identifier- --------Detailed Description------------------------
SP ethernet
network
sp Suggested Action
92
snmp
Could not obtain snmp agent handle. Could be
misconfigured.
"State rx_errs has increased too quickly check SP
settings"