Qos - HPE 3PAR StoreServ 7000 Storage Service And Upgrade Manual

showport
cli%
N:S:P Mode
FailoverState
...
0:0:1 target
none
0:0:2 target
none
...
port Example 4
Component ------------Summary Description------------ Qty
Port Ports with mismatched mode and type
Component -Identifier- ------Detailed Description-------
Port port:2:0:3
port Suggested Action 4
This output indicates that the port's mode, such as an initiator or target, is not correct for the connection
type, such as drive, host, ISCSI, FCoE, or RCFC. Useful HPE 3PAR CLI commands are showport,
showport -c, showport -par, showport -rcfc, showcage, etc.
cli% showport
Component -Identifier- ------Detailed Description-------
Port port:0:1:1
cli% showport
N:S:P
0:1:1 initiator
0:1:2 initiator loss_sync 2FF70002AC000190
0:1:3 initiator loss_sync 2FF70002AC000190
0:1:4 initiator loss_sync 2FF70002AC000190

qos

• Displays Quality of Service (QOS) issues
• Checks for Quality of Service rejects over the previous 24 hours
Format of Possible qos Exception Messages
QOS <vvsetname> "VVSet has logged <count> rejects in 24 hours"
qos Example
90
qos
State ----Node_WWN---- -Port_WWN/HW_Addr-
ready 2FF70002AC00006E
offline 2FF70002AC00006E
Mismatched mode and type
Mismatched mode and type
Mode State ----Node_WWN---- -Port_WWN/HW_Addr- Type
ready 2FF70002AC000190
Type Protocol Label Partner
20110002AC00006E host
20120002AC00006E free
20110002AC000190 rcfc
20120002AC000190 free
20130002AC000190 free
20140002AC000190 free
FC - 1:0:1
FC - 1:0:2
1