Controller Node Enclosure Rear View - HPE 3PAR StoreServ 7000 Storage Service And Upgrade Manual

Port
FC-1
FC-2

Controller Node Enclosure rear view

Figure 50: HPE 3PAR StoreServ 7000 Storage Controller Node Enclosure rear view
HPE 3PAR StoreServ 7000 Storage Controller Node Enclosure rear view
Item
1 Power connection 0
2 Power Cooling Module 0
3 Controller Node 0
4 Controller Node 1
5 Power Cooling Module 1
116 Controller Node Enclosure rear view
FC onboard ports numbering
Node:Slot:Port (N:S:P)
N:0:1
N:0:2
Description
This power connection requires a power cable to be attached between the
power supply and an independent electrical source. This electrical source
must support the entire power load of the enclosure and have its own
circuit breaker.
The Power Cooling Module (PCM) is an integrated power supply and
cooling fan and also contains a replaceable battery. The PCM battery is
shipped fully charged, but the batteries might lose some charge and show
a degraded status immediately when power is applied. One PCM can
supply enough power for the Controller Node Enclosure. Connect each
PCM to draw power from different mains to allow for continued operation if
one main fails.
The Controller Node caches and manages data from the storage system
and provides hosts with a coherent, virtualized view of the storage system.
The Controller Node caches and manages data from the storage system
and provides hosts with a coherent, virtualized view of the storage system.
The Power Cooling Module (PCM) is an integrated power supply and
cooling fan and also contains a replaceable battery. The PCM battery is
shipped fully charged, but the batteries might lose some charge and show
a degraded status immediately when power is applied. One PCM can
supply enough power for the Controller Node Enclosure. Connect each
PCM to draw power from different mains to allow for continued operation if
one main fails.
Table Continued