HPE 3PAR StoreServ 7000 Storage Service And Upgrade Manual page 83

checkhealth -detail pd
cli%
Checking pd
Component -------------------Summary Description------------------- Qty
PD Unbalanced PD types in cages
PD PDs that a degraded
------------------------------------------------------------------------
2 total
Component --Identifier-- ----------------------------Detailed
Description----------------------------
PD Cage:0
PD disk:0
--------------------------------------------------------------------------------------------
2 total
pd Suggested Action 2
The primary and secondary I/O paths for Drives (PDs) are balanced between nodes. The primary path is
indicated in the showpd -path output and by an asterisk in the showpd output. An imbalance of active
ports is usually caused by a non-functioning path/loop to a Drive Enclosure (cage), or because an odd
number of Drives is installed or detected, or Drives were installed in the wrong slots. To diagnose further,
use CLI commands such as showpd, showpd -path, showcage, and showcage -d.
cli% showcage -d cage0
Id Name LoopA Pos.A LoopB Pos.B Drives Temp
0 cage0 0:1:1
-----------Cage detail info for cage3 ---------
Position: ---
Interface Board Info
Firmware_status
Product_Rev
State(self,partner)
VendorID,ProductID
Master_CPU
SAS_Addr
Link_Speed(DP1,Internal) 6.0Gbps,6.0Gbps
PS PSState ACState
ps0 OK OK
ps1 OK OK
-------------Drive Info------------------
Drive DeviceName
0:0 5000c500725333e0
0:1 5000c50072533d24
0:2 5000c500725314a0
0:3 5000c50072531bf4
0:4 5000c50072531c74
0:5 5000c50072531ec8
0:6 5000c50072531384
0:7 5000c5005f4848bc
cl% showpd
pd Example 3
PDs FC/10K/450GB unbalanced. Primary path: 5 on Node:0,3 on Node:1
Degraded States: missing_A_port,servicing
0 1:1:1 0
Card0
Current
402e
OK,OK
HP,DCN2
Yes
50050CC10230567E
DCState Fan State
OK OK
OK OK
State Temp(C)
Normal 20
Normal 21
Normal 21
Normal 22
Normal 22
Normal 21
Normal 22
Normal 22
1
1
2
RevA RevB Model FormFactor
8 20-22 402e 402e DCN2
Card1
Current
402e
OK,OK
HP,DCN2
No
50050CC10230567E
6.0Gbps,6.0Gbps
Fan0_Speed Fan1_Speed
Low Low
Low Low
----PortA----
LoopState
OK
OK
OK
OK
OK
OK
OK
OK
SFF
----PortB----
LoopState
OK
OK
OK
OK
OK
OK
OK
OK
Troubleshooting 83