System Cabling; Installing Telephone Terminals; Table 4-7 Color Code For Cables - Siemens hipath 1100 Service Manual

Installation

System Cabling

4.14 System Cabling
Introduction
The connection between the extensions and the system is provided with cables as
follows:
Table 4-7 Color code for cables
Color Group
1
2
The end of the cable that is attached to the system's Main Distribution Frame uses
one of the connector types shown in"Main Distribution Frame" on page 3-47.

4.15 Installing Telephone Terminals

A System Telephone has four wires (A, B, C, D), two used for voice (A, B), and two
for data (C, D).
A Standard Telephone (DP/MF) has only two wires (A, B), both used for voice.
Standard Telephones (DP/MF) must be connected to the HiPath 1100 system using
only wires A and B. Do not use wires C and D.
4-46
Pair A Wire B Wire Color Group
1 br/az
2 br/lr
3 br/vd
4 br/ct
5 br/cz
6 vm/az
7 vm/lr
8 vm/vd
9 vm/ct
10 vm/cz
az/br
lr/br
vd/br 3
ct/br
cz/br
az/vm 4
lr/vm
vd/vm
ct/vm
cz/vm
For internal distribution only
Pair A Wire B Wire
11 pt/az
12 pt/lr
13 pt/vd
14 pt/ct
15 pt/cz
16 am/az
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
az/pt
lr/pt
vd/pt
ct/pt
cz/pt
az/am