Configuring Settings During An External Call - Siemens Gigaset DL500A User Manual

signal that another external caller is trying to
get through. If you have CLIP, the number of
the waiting caller or the corresponding
directory entry is shown in the display.
The caller will hear the ringing tone.
When call waiting is deactivated, the caller
will hear the busy tone if you are already
making a call
Activating/deactivating call waiting
¢
v Ç Select Services
Status Select On / Off to activate/deac-
tivate call waiting.
¤
Press the display key
The base establishes a connection to the
exchange to send a corresponding code.
¤
After confirmation from the fixed line,
press the red end key T.
Fixed destination call
If you pick up the receiver or press the
handsfree key d, the number stored is
dialled automatically after five seconds with-
out having to press a button.
¢
v Ç Select Services
¢
Fixed Destination Call
¤
You can enter data in the following fields:
Phone Number:
Enter the phone number.
Status:
Activate/deactivate function.
§OK§
Press the display key to send a
specific code to the exchange.
¤
After confirmation from the telephone
network, press the red end key T.
¢
Call Waiting
§Save§
.
Making calls using network services
Configuring settings during
an external call
Accepting a waiting call
You are making an external call and hear the
call waiting tone.
§Accept§
Press the display key.
Once you have accepted the waiting call,
you can switch between the two callers
¢
("Call swapping"
Please note
u
Without CLIP, a waiting call is only
announced with a signal tone.
u
An internal, waiting call is shown on
the display. You can neither accept
the internal call nor reject it.
u
For instructions on accepting a wait-
ing external call during an internal
¢
call, page 75.
Rejecting a waiting call
You can hear the call waiting tone but do not
want to speak to the caller.
¢
§Options§
Reject Waiting call
The caller hears the busy tone.
Please note
You can also replace the receiver to end
the current call and lift the receiver again
to accept the second call.
Consultation calls (external)
You can call a second external caller. The first
call is placed on hold.
During an external call:
§Ext.Call§
Press the display key.
The previous call is placed on
hold. The caller hears an
announcement or music on
hold.
~
Enter the second participant's
telephone number.
page 34).
33