Configuring Settings For The Next Call; Configuring Settings During An External Call - Siemens Gigaset DX800A User Manual

Configuring settings for the
next call
Activating "anonymous calling" for
the next call (VoIP/ISDN)
You can withhold your phone number for
the next call (CLIR = Calling Line Identifica-
tion Restriction).
In idle status:
¢
v Ç Select Services
¢ ¢
Next Call Withhold Number
Select and press
~
Enter the number or copy from
the directory.
§Dial§
Press the display key or pick up
the receiver. The number is
dialled.
Generally, you can withhold your number for
¢
all calls ( page 60).
Activating/deactivating the
keypad function for the next call
(ISDN)
Prerequisite: Your telephone is connected
to the ISDN network. You have selected an
MSN as the send connection.
The keypad function allows you to control
certain features by entering sequences of
characters and digits. For keypad control see
page 145.
You can temporarily activate keypad control
for the next call via ISDN.
¢
v Ç Select Services
¢
Keypad Control
Select and press
~
Enter phone number.
§Dial§
Press the display key or pick up
the receiver. The number is
dialled.
§OK§
.
¢
Next Call
§OK§
.
Making calls using network services
Configuring settings during
an external call
Please note
For VoIP telephony, the services described
below are only available if parallel IP con-
nections are permitted.
Initiating ringback when busy/no
answer (ISDN connection)
Please note
u
You can use this function only for calls
via the ISDN network.
u
A ringback display key/menu func-
tion for activating ringback only
appears on the base if the exchange
supports this feature.
If the person you are calling does not answer
or their line is busy, you can initiate ringback.
Ringback when busy: The ringback will take
place as soon as the party in question termi-
nates the current call.
Ringback when no answer: The ringback will
take place as soon as the party in question
has made a call.
Initiate ringback:
Prerequisite: You have dialled a number and
set an MSN for your ISDN connection as the
send connection.
§Ringback§
Press the display key.
If ringback has been successfully activated,
the message Ringback activated is dis-
played. The call is ended. The base returns to
idle status.
If ringback has not been successfully acti-
vated in the exchange, Ringback not possi-
ble! appears in the display.
& / T
Replace the receiver or press the
red end key.
63