8.1 Configure Exception Alarm
Purpose:
Configure alarms which are triggered by exceptions to take necessary actions in time.
Exception types include:
HDD Full: Storage media is full.
HDD Error: Writing storage media error, unformatted storage media, etc.
Network Disconnected: Network cable is disconnected.
IP Address Conflicted: Duplicated IP address.
Illegal Login: Incorrect user ID or password.
Record/Capture Exception: Recording or capture exception.
Step 1 Go to Configuration > Event > Basic Event > Exception.
Step 2 Select Exception Type and set corresponding alarm linkage actions, including audible
warning and alarm output.
Step 3 Click Save.
Intelligent Analyzer User Manual
Chapter 8 Event Configuration
Figure 8-1 Exception
32