Table of Contents
Advertisement
9.1 User Management
Purpose:
Add and delete users, and modify the password and permission of users.
Step 1 Go to Configuration > System > User Management.
Step 2 Click Add.
Step 3 Enter User Name and Password and enter the same password in Confirm.
Step 4 Select the user permission level.
Operator: The operator has permissions for Preview, Playback, Backup, Log Search and
Parameters Settings.
Guest: The Guest has permissions for Preview, Playback, Backup and Log Search.
Step 5 Select user permission as needed.
Step 6 Click OK.
9.2 HTTPS
Purpose:
HTTPS provides authentication of the web site and its associated web server, which protects
against Man-in-the-middle attacks. Perform the following steps to set the port number of https.
E.g., If you set the port number as 443 and the IP address is 192.168.1.64, you may access the
device by inputting https://192.168.1.64:443 via the web browser.
Step 1 Go to Configuration > Network > Advanced Settings > HTTPS.
Step 2 Check Enable.
Step 3 Create the self-signed certificate or authorized certificate.
Create the self-signed certificate
1) Select Create Self-signed Certificate as the Installation Method.
Intelligent Analyzer User Manual
Chapter 9 Security Management
Figure 9-1 User Management
33
Advertisement
Table of Contents
