Live view displays the video image getting from each camera in real time.
3.1 Start Live View
Click
on the main menu bar to enter the Live View.
● Select a window and double click a camera from the list to play the video from the camera in
the selected window.
● Use the toolbar at the playing window bottom to realize the capture, instant playback, audio
on/off, digital zoom, live view strategy, show information and start/stop recording, etc.
3.1.1 Configure Live View Settings
Live View settings can be customized. You can configure the output interface, dwell time for
screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
Steps
1. Go to System → Live View → General.
2. Configure the live view parameters.
Video Output Interface
Select the video output to configure.
Live View Mode
Select the display mode for Live View, e.g., 2*2, 1*5, etc.
Dwell Time
The time in seconds to wait between switching of cameras when using auto-switch in Live
View.
Enable Audio Output
Enable/disable audio output for the selected video output.
Digital Video Recorder User Manual
Chapter 3 Live View
Figure 3-1 Live View-General
20