Table of Contents
Advertisement
System Integration
2.2.3
Reading Codes in a PROFIBUS Environment
Power supply
Object
with DMC
A PG/PC intended solely for setup is connected via the RS-232 interface. Via
PROFIBUS, there is a connection to a PLC and to another PG/PC.
The VS 130 is controlled via PROFIBUS by the PLC and the codes output on this
PG/PC once again via PROFIBUS. In this situation, it is, of course, also possible to
filter the read character string and to append additional characters at the start or
end (see Section 5.3.4).
2-4
Processing unit
PROFIBUS DP
Sensor head
Mounting
mechanism
Ring flash
Light barrier
Programmable controller
PS CPU
PG / PC
for setup software
Conveyor
Vision Sensor VS 130
PG / PC
for display
A5E00199459-01
Advertisement
Table of Contents
